Application:

Apply one coat Geoflex Primer, by means of brush or roller, to prepared surface at the rate of 6-7 square metres per litre. Allow to dry.

SYSTEM A

Glass reinforced (Smooth surfaces). Apply a base coat of Geoflex to the primed surface, by means of brush or roller, at the rate of approximately half a litre per square metre and immediately embed a layer of GLASCOTE 60, smoothing with a brush. Allow to dry. Apply a second coat of Geoflex Liquid Plastic at the rate of approximately 1 litre per square metre. Allow to dry. Apply a third coating, if necessary, so as to ensure total cover of the GLASCOTE.

Un-reinforced. (Face brick surfaces) Apply Geoflex in two or three coats, by means of brush, at the total coverage rate of approximately 1 litre per square metre to the pre-primed surface. Allow for drying between coats.

Application should be undertaken at ambient temperatures of between 5º and 35º C.

Drying time at 15° C is approx. 1 hr

Liquid Plastic Waterproofing

Description:

Geoflex is a flexible, acrylic-based Waterproofing Liquid.

It is a waterproof coating that affords excellent protection against the ingress of rainwater and dampness, has a high resistance to ultra-violet light and a long life-expectancy.